Search results

Hi Roberto I have the cyclone fitted directly onto the bin which I think is the best way, you can see what's going on. There is a release valve on the cyclone, a 5 minute job to make. My Camvac is on a little platform next to it, the 'exhaust pipes' go into a homemade baffle box (not on...

Bgoat, I made Aldel's holder for my Woodrat, see photo: Unfortunately Aldel's website has disappeared & I have lost the description. I can send you sketches & notes if that's any help.

https://www.amazon.co.uk/Suki-6178014-U ... B0038Q8XDO

I have the drilling/milling stand BF1240 and recommend it. The BF1243 is the same but with increased vertical/horizontal travel. I've never had a pillar drill but the Wabeco does all I need. I assume the reviews you mention refer to the drill stand, certainly the BF 1240 range is rock solid and...

I have one, and very good it is too. I ordered it direct from the manufacturer: https://www.wabeco-remscheid.de/ Their website has an English translation option.

Swiss made aluminium clamp-on vice, good working condition: £25 collected from Sheffield.

Sorry Jamie, now sold. I've sent you a pm. Phil

These are sold in fours: 48" Long 3/4" T Track - 3/4" Wide x 4 Pieces Dakota Part No. DK2051PACK4 As I only needed one length, these are the other three. Unused, £20 collected from Sheffield.

Chippy, I have had the MT55cc for a year but not made many bevel cuts. This morning I clamped the rail & the MDF & drew a pencil line against the rubber strip. At 90 degrees the cut is spot on the line, in fact I would say it bisects it. Made some test 45 degree cuts, the cut was a good 1mm away...

Ok, thanks.

Yes, it's square. PM me your address. Thanks, Phil

Ok, noted, thanks.

Incra rule set comprising a 300mm straight rule, a 300mm T rule and a 300mm bend rule: Very little use, £50 including UK postage. Moore & Wright combination square with 300mm/12" metric/imperial rule: Good used condition,sorry no scribe (as usual). £20 including UK postage. AccuScribe...

Rockley Carlton Sawmills at Creswell sell waney edge oak: carltonwoodmill.co.uk

As has been said, the main thing is to get as much as possible out and into temporary accommodation. We put up our old frame tent on the garden and filled it with timber, hand tools, power tools, anything moveable. That way you only have to move stuff twice, it's soul destroying shifting gear in...

The Carroll sanders don't seem to be around any more. Steve, do you have a link?

Well, to reiterate what I said 4 long years ago, "I have the RDX 800i & it's worked ok for me for years. The cross bar on mine is bent upwards in the middle, although I can't say whether that's how it was when I bought it. As you say, the bag sticks up into the cage when it's empty, but as it...

Paddy I have the Stanley No. 50. The cutters have a series of notches on the back, rather than the single side notch. However the principle is the same, the sliding section is removed & the smaller cutters held with a 'Cutter Holding Screw', a flat headed bolt which fits through the bolt hole...

I can recommend Ronseal Diamond Hard Floor Varnish - hard wearing, easy to apply, no smell that I can remember. I used clear satin. Regards, Phil

Dusty, these are projection hinges: https://www.sdslondon.co.uk/P/guide-to- ... inges.html Best wishes, Phil