Search results

Spots sound like oil from compressor, your not sanding your polishing with 600s to get lumps out, scrape first light sand with p400, topcoat is too thin, warm it up first in a bucket of hot water

Sikkens waterbase external from symphony coatings, sirca external waterbase from Isf coatings, Milesi external waterbase from mylands, 2 coats of primer, sand and apply end grain sealer, 1 coat of topcoat, apply end grain sealer again and then a final topcoat, should last 8 to 10 years, or you...

I'm not a joiner, I'm a finisher, nothing wrong with poplar/tulip for your build, accoya is way to expensive for a kitchen, what type of paint are you thinking of using

Osmo is probably the best and easiest to work with, unless your spraying it, rag it on, wipe off, leave it till next day, quick denib with p320, repeat process, may need 3 coats, secret with osmo apply thin coats so it can dry properly.

Nitrile powder free, apart from when cleaning guns in solvents