Search results

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. D

    Old Bandsaw Blade Uses.

    An angle grinder is what I was going to use. Can't believe the superb variety of suggestions, top class folks!
  2. D

    Old Bandsaw Blade Uses.

    I could probably make a hundred knives come to think of it 😂
  3. D

    Old Bandsaw Blade Uses.

    Cracking ideas, extreme hoopla! For me even a normal hoopla would be extreme. I like the idea of a stair saw actually, though I don't know when I'd use it... Maybe for the wall :-) It's likely tough enough for a nice wee marking knife and it'd be interesting to make. Thanks folks D
  4. D

    Old Bandsaw Blade Uses.

    Hi guys, so I've got a 3tpi 3/4" blade that's badly kinked so I've replaced it. I'm now sitting looking at the old blade, which actually is still quite new and sharp, and wondering if there's anything I can use it for? Anyone cut one up for anything? I was thinking possibly a parting tool for...
  5. D

    Groove and glue or biscuits?

    Thanks, I should also add that this is just half of it, the left half. The right half will be its mirror image and there will be a hanging rail in the middle space. It wouldn't get in the room otherwise and will get screwed together on site and a couple of wide birch ply braces spanning the gap...
  6. D

    Groove and glue or biscuits?

    Hi guys, I'm currently planning a large storage unit for a customer. It'll be made with 18mm birch plywood and will be simply made with upright pieces with a top and bottom with shelves inside. I'll add doors too but my question is about joining the plywood together. I can't decide what would be...
  7. D

    Circular blade for tenons?

    Vertical! Of course! Hahaha I had the thing on its side taking a million passes. Thank you :-)
  8. D

    Circular blade for tenons?

    Hi guys, I've got 60 m+t joints to cut and plan on cutting the tenons on the table saw using my crosscut sled. The only issue it the ATB blade leaves a very uneven finish due to the alternating bevel. I guess a purely flat blade would cause a lot of tearout and I can't fit a dado blade on my saw...
  9. D

    Morticer Shortage

    I bought a Japanese 16mm chisel and bit for it and have been cutting mortise in beech and oak. The first cut is tough but slow even pressure sorts that. Once you're in it chomps away happily. It's definitely needs secured. I've bolted it onto a solid worktop as a base which can then be clamped...
  10. D

    Multitool

    I think if you buy a good quality multitool you will find many uses for it once you've realised how bloody long it takes to get the tiles off and have reverted to hammer and chisel/sds and chisel. Buy the tool, they're ace. I just replaced my cheapo Aldi multitool with a milwaukee one. D
  11. D

    Morticer Shortage

    I just bought the Charnwood W316 yesterday. It's sold out everywhere except Snainton Woodworking Thought that may be of interest. D
  12. D

    Adding potentiometer to bench grinder.

    Aha! What a response! Luckily, it would seem, just after I posted this thread my teething 7 month old boy decided to go utterly mental, thus making me forget (like so many other things) about both my idea and also this thread. Silver linings eh? This thread has, however, been quite the wealth...
  13. D

    Adding potentiometer to bench grinder.

    Eyup, I'm just about to order a potentiometer to give my 8" record power bench grinder variable speed. Should be a fairly simple job, has anyone done this before? Is there something I'm missing or is it really as simple as wiring the pot in front of the motor? Cheers Damo
  14. D

    Grinder bought!

    Thanks guys, I got one of the multi jigs from the guy that makes them and sells them on eBay. Roll on Monday at the workshop. All I need to do now is knock up a pedestal for the lathe, it'll be getting bolted to both the wall and into the concrete floor, should be fairly solid :-)
  15. D

    help

    I just bought a Record Power 8" grinder with white wheel and one of those jigs off ebay. Cheapest way I could find whilst still being an efficient and repeatable way to sharpen.
  16. D

    Grinder bought!

    Well look what the postie brought me today! OK, I know it's not a fancy Tormek or Sorby or a CBN thingmie but it's perfect for me and I thank everyone who helped me along the road to it's purchase. It was quite hard to get for its RRP. It was sold out almost everywhere and the ones all over...
  17. D

    What blade sits on your table saw on a daily basis?

    I use a CMT 285.040.10M for my day to day cutting Mostly ripping and crosscutting hardwoods. 40 tooth, super sharp. Using the Axminster 10" trade series. D
  18. D

    Chisel sharpening on a budget...

    Thanks, gonna get an 8" grinder now instead of the 6", whichever model I go for :)
  19. D

    Multitool

    I've used one for exactly that, they can wander easily but if you know this in advance and practice on some scrap it can be a very efficient and clean way to cut skirting. They're a great tool once you know how best to use them. I've been fitting a kitchen this week and it's been worth it's...
  20. D

    Multitool

    I've been using the dewalt corded one and it's absolutely flawless. Fast blade removal, excellent cutting. I think all multi tools are pretty loud...
Back
Top