Search results

It is a Eurovudas cabin and I bought mine online from Garden Adventure. I got the Rumus/Rumak style. HTH Steve

I just been through exactly the same process as you, debating the various options and in the end opted for a log cabin kit. I upgraded the base so it could sit on pier foundations instead of a concrete slab, put felt shingles on the roof and I've ended up with a 5m x 4m 44mm double glazed cabin...

Warwickshire College at Leamington Spa also run a similar course. Depending upon previous experience, they quite often recommend to start with basics. Sharpening chisels and blades, setting up a plane before making a small frame by hand with different joints in each corner. After the first term...

Did you follow plans or work from your own design?

The most efficient I have seen was wall mounted bike hangers. Basically hooks screwed into the wall that you hook the wheel round. By careful selection of the height of the hook then you can overlap the pedals and handlebars so 5 bikes do not take 5 bike widths of the wall. HTH

You could use a couple of pulleys and a belt to reduce the speed. S.

Start off looking within the "Sent" and "Outbox" folders within your email system because that will prove whether the email was sent or not. Wording may be slightly different depending on the software used. "Sent" means that it has gone whilst those in the "Outbox" will be waiting to leave your...

As you suck the air out then the bag will pull into the voids between the veritcal sheets. Those sheets with voids both sides will have equal pressure so will be stable as long as they don't crumble. The ones at the end only have the void on their inward facing side so will be pulled that way...

You will need a bottom bracket to go between the two cranks. It is this that goes through the wheels.

These would fit the bill. They are unicycle cranks as chunkolini suggested. http://www.oddballs.co.uk/steel-standar ... -3088.html

If you were doing it professionally then you would want tandem cranks so that the threads go in the correct direction and the pedals don't unwind and fall off. However at this time I guess you would be able to get away with 2 bike left hand cranks and a bottom bracket. Examples from Halfords...

Drillbit, I'm only 15 miles away and you are more than welcome to come and use my planner/thicknesser. I quite often slice up 1" oak boards on my table saw and reduce them to 3-5mm. HTH Steve

I once read a similar quote of 3 mistakes of any kind in one session then give up