Search results

Hello guys, I was wondering if I could get some advice on what blade size to use on my bandsaw to rip some 2x2" lengths of pine into about 5mm stips on my 375w 10'' Woodworking Bandsaw (that I usually use for cutting circuit boards and thin laminates). Was thinking around 1/4" 14tpi?

Planning on building some Modular Cubes for storage (12"³ inside monument), but would like to make something a little more refined then just glued and screws butt joints, and would like to eliminate screws all together......but these boxes will have to hold a fair bit of weight, so don't know if...

Been looking at options for cutting down large MDF sheets and have come across the Kreg Rip-Cut. http://www.kregtool.com/RipCut-Prodview.html Seems super cheap, and much faster then measuring and clamping a straight edge for each cut......so anything like this available in the UK?

Hello guys, Want to knock up some MDF 12"x12"x12" module cubes for storing vinyl in.......akin to this: And was wondering the best way to cut down the board without a table saw. Was thinking clamping down a 2x1 as a fence and using a Jig saw......bad/dangerous practice?

Having trouble finding what drill sizes to use for different dowel thickness's in metric....anyone got a handy little chart I can pint out? Imperial units were a dirty word by the time I got to school!

Was wondering how to adjust the table on a saw to make it 90° as at them moment the table is a few degrees out making the cutting of bridle joints just a little out. Seems the table only allows for tilting left to right, not front to back to correct this? My saw = Charnwood W715 10''...

Hi guys, Just switched out my wood cutting blade and had the new blade snap on me (SuperTuff Carbon in 14tpi 3/8”) while cutting a small bit of 12mm plexi???? Wondered what part of my saw set-up could have been the problem?

Hello guys, I want to make up some screen printing screens (Just a sturdy box frame will a mesh on oneside), so need to join up some wood and only have a band saw at my disposal! SO, being a total woodwork novice I would love to hear some thoughts on how I can get something close to...

Iv just got my first bandsaw, a Charnwood W715 10'' Woodworking Bandsaw. Trouble is I cant get it to cut though 45mm plywood without running out of puff!? (and that trying to cut really REALLY slow) Is this normal for a 375w saw, or have I set it up totally wrong?