Recent content by zoki4691

For sale Kanna finishing made by Takeo Nakano. Knife width 70 mm. I ask 300 euros Japanese finishing planes "TORYO HOMARE" with body in white oak "TORYO HOMARE" means: the honor of the master carpenter. This plane was made by master blacksmith Nakano in Yoita, Niigata province. The blade is...

Thank you. My saw is 2.2 mm thick. A diamond blade with 12 teeth in polycrystalline diamond. The PKD is 50 times harder than Tunsteno carbide. The cuts are long vein, along the fibers and inserted into Coumaru and slotted through the fibers. So done and very stiff

Thanks a lot... :D :D :D

Hard Maple - Coumaru

I made a simple jig x make wooden comb. I wanted to do it with a piece of Hard Maple. This wooden comb is practical and functional, massages the scalp, without tearing the hair. Being made of wood, it is not charged with static electricity and therefore does not electrify the hair and prevents...

The strips all run around a threaded bar from M10, and everything only goes up from the top with an M10 nut. After the holidays all stripes should be folded like a fan, so they take up less space.

Unusual decorations, I would say. I made some wood shavings, made with the Japanese planer. I made various essences, walnut, larch, pine, and oak.

They do not make many pieces, because I cut it twice. First straight and second one inclined at 22.5 degrees. I did not throw a lot of stuff. In the first tree went 90 m, and in the second I finished yesterday 140 m, which bigger ,,,

I wanted to make a wooden Christmas tree made of wooden strips. I found walnut strips and result and this ,,,

He wanted to do it this way, tight. The template allows you to make precise strokes up to 4 thousandths of an inch ,,, https://www.youtube.com/watch?v=fKiog4wP_Ig

https://www.youtube.com/watch?v=_PCCMMR-y-A

Steve, come without protection, because they are also used for processing of the metals, to tighten profiles, where they are not needed. So, if you work in wood you take them. You pay 6 euros for a couple, or 68 euros for a box of 100 pieces https://www.tendotools.com/en/diversen/ ... 24010.html

Suffice it to say that they have a lifetime warranty and a clamping force of 900 kg The screw with lubrication.

it will be enough for the Kanna planes ?