UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
T
Reaction score
10

Latest activity Postings About

    • T
      Hi all, I'm in the market for a tracksaw and have been researching the forum and other sites as well as watching Peter Millards videos...
    • T
      Dust extraction is important I think. I’m about to spend a small fortune on extraction because the thought of dealing with dust with the...
    • T
      I used Gorilla wood glue to glue a workbench top together which had split 3/4 of the way and it holds without any fixings and being...
    • T
      themack replied to the thread Roof felt.
      Just an update, it's done by crawling along the shed roof on a board. Thanks for all your help and ideas. Tomorrow I will yield the...
    • T
      themack replied to the thread Roof felt.
      Thanks all for your input, we will try to get 2 ladders ( pieces of an extension ladder) behind shed and fence, use them as stepping...
    • T
      themack reacted to redhunter350's post in the thread Roof felt with Like Like.
      Why not as Artie says add a temporary support inside and make a couple of cat ladders - roofing lathes are good material for a these --...
    • T
      themack reacted to HamsterJam's post in the thread Roof felt with Thanks Thanks.
      Because I had some spare tubes, I used gutter and roofing sealant to stick down the loose ends of felt shingles to stop the wind lifting...
    • T
      themack replied to the thread Roof felt.
      Would it be an option to put a slim, long piece of pressure treated timber along? The shed is 3m/10ft long and if I put a 3m long piece...
    • T
      themack replied to the thread Roof felt.
      I thought I could roll on the glue over it from on side with an extended paint brush roller?
    • T
      themack replied to the thread Roof felt.
      Hmm, I thought about that, not sure it takes the weight, it's a shiplad shed with 9mm OSB on top. And the Apex is quite steep.
    • T
      themack posted the thread Roof felt in Workshop Builds & Tours.
      Good morning all I have finished building a work shop with a felt roof. It's an apex roof. I have put a roof membrane (waterproof)...
    • T
      Quite so, Themack. I also have an adapted powered respirator (Trend Airshield) to protect my lungs and a Titan shop vac, with cyclone...
    • T
      Hmm, I don't think this is going to cut the mustard. It won't take suck up all the dust you create with sanding e.g.. Unless you have...
    • T
      themack reacted to MarkAW's post in the thread New workshop question with Like Like.
      They look good, but a lot more expensive than a small roll of DPC
    • T
      themack reacted to flying haggis's post in the thread New workshop question with Like Like.
      why do they only accept timber up to 35mm wide? break the silly lugs of and you could fit wider timber. it even looks like it would take...
  • Loading…
  • Loading…
Back
Top