Thank you for your reply. Did you change the 'top' bearings as well as those within the quill ?
And what approx would you suggest I should be paying for the bearings that you recommend.
Thanks again.
Thank you for your reply. Is there an easy way to determine what is worn in a home workshop ?
I've attached a picture of the front of the machine.
Hi Thank you for your reply.
Did you change the bearings at the top as well as those within the quill ?
Hi,
I have acquired a Fobco Star of unknown age (The rating plate was missing)
It looks like it's been well used and I intend to carry out a restoration.
An initial trial revealed some play when drilling.
When gripping the chuck this play can be felt and it increases as the quill is extended.
Is...
Many thanks for that information. I fear that in my first attempt I had it set to remove too much material, resulting in some blueing and a very heavy burr.
thanks again
Steve
Hi
I have owned a Scheppach HM2 Kombi for a few years and found it to be a good machine. I have in the last few days obtained a planer blade/knife sharpening jig / attachment and although it looks straight forward, I was wondering if anyone had a manual for this.
Having used it for the first...
Hi Robert.
I know that this is a relatively old thread, but I would be very grateful if I could get a pdf of the 612 bandsaw in English.
Unfortunately, I cannot see how to email you ?
Thanks