Help Support UKworkshop.co.uk:
-
-
MMisterdog reacted to CMax's post in the thread Plunge saw buying recommendations £150-250 budget with
Like.
Economic wise, for the little I use it, it makes sense to me. I could buy 4! Mac Allister's for the price of 1 Festool: Mac Allister... -
MMisterdog replied to the thread Composite Decking / Laser Level / Lighting.I also have one of those (a surveyors tripod) it doesn't go lower than 1Metre and has no fine ratchet adjustment for height. So a...
-
MMisterdog replied to the thread Composite Decking / Laser Level / Lighting.Sell it for less than the Chinese £ 20 ones ?
-
MMisterdog replied to the thread Composite Decking / Laser Level / Lighting.:oops: Both the DeWalt and the Bosch are identical, read the spec they both have 1/4" fittings. The Bosch one is anodised black and...
-
MMisterdog replied to the thread Composite Decking / Laser Level / Lighting.
-
MMisterdog replied to the thread Composite Decking / Laser Level / Lighting.Most new mattresses advise opening and leaving in a spare room to vent for a few days before use. To allow the glues and foam to out...
-
MMisterdog replied to the thread Composite Decking / Laser Level / Lighting.With the money I saved I bought an adjustable height camera tripod which is fairly essential for all these laser levels. Zomei Q111...
-
MMisterdog reacted to Sideways's post in the thread Composite Decking / Laser Level / Lighting with Like.
This is a good recommendation. Thanks ! I have had really cheap line lasers before and found them little use but the cross line, self...
-
MMisterdog replied to the thread Composite Decking / Laser Level / Lighting.I bought one of these laser levels...
-
MI had a similar issue in my garage, it's roughly the same size as yours (approx 8 metre X 4 metre), it's a concrete block built garage...
-
MI may be stateing the obvious but self leveling sreeds must be troweled out to level. The self leveling bit means the tool marks disappear.
-
MMisterdog replied to the thread Removing Ercol 'Golden Dawn' finish.Getting the the stain out of the grain is the tricky bit, leave it in and make a feature out of it. Gives a lighter finish and shows the...
-
MMisterdog replied to the thread Air source Heat Pumps any good?.If only the government would give me £ 100 K I could do that. Outrage.
-
MMisterdog replied to the thread Air source Heat Pumps any good?.I installed a state of the art Ideal Logic condensing boiler some 7 years ago (a superb piece of engineering by the way). The sales...
-
MMisterdog replied to the thread Removing Ercol 'Golden Dawn' finish.Nice finish, though the first time a hot mug even with using a coaster gets near it ,will leave a ring. I would spray some 2K, 10%...
-
-
Loading…
-
Loading…