Recent content by meccarroll

Hi looking for a HVLP Spray outfit, anyone got one to sell? 4 stage preferred.

LoL as much as they cost new but if you can't get one then!

Price?

The regulation relates to woodworking machines stopping in ten seconds which some already do without the need of a break and other woodworking machines may use other methods of operator protection. It was brought in for employers to further protect their employees. It relates to work equipment...

Lowestoft.

Sorry for the late reply, I am located in Lowestoft, Suffolk right by the sea.

SOLD Kity 629 Tilting Spindle Moulder, had this a few years and not used it except to try it out. Apart from some touch up paintwork the spindle moulder is in really good condition, all working as it should and barely used. Adjustable tilt, Height and fences. It is sat on wheels the front ones...

What you have posted is quite significant in relation to Oak as a cladding and the effect of tannin and I would like to thank you for your time. Great information thank you. Should be very useful to me in the future. :-)

Quite interesting, and as MikeG says "Crack On".

We used to have chimneys with a flue and ventilation, cook over a vented oven, leaky windows too so lots of ways to disperse any moisture build up long before it reached the internal fabric of the walls. Now we have microwave ovens, dishwashers, washing machines, tumble driers, showers etc...

Interstitial condensation occurs within wall fabric, it's where warm moist air meets the cooler outside part of the wall forming internal condensation within the wall and so may not be detected from surface finishes until damage has already occurred. If you already have an internal vapour...

This is interesting, you have mountains of oak to use, very lucky. Although Jacob is right is saying Cedar would be an excellent material to use Oak is not at all bad either if it's freely available. I'd calculate the cost of slabbing the oak trees, storing them while they dry and then milling...

Bit late now but it does take a while to load up, several minutes even for my cable internet.

Make an MDF box to fit the draws in. fit the box in the opening. Stand the box on a plinth. leave enough space at the sides of the box to fit infill pieces of mdf (similar to an architrave on a door). If the infill and draw fronts are the same thickness MDF you will end up with a nice uniform...

https://www.toolstation.com/hafele-meta ... gLSUfD_BwE To make the draws: These can be used to make the draws. You cut the bottom board the width required making an allowance for the side draw runner . The bottom depth is the same as metal draw side. Cut the back the depth of metal draw and...