jimbo123

Further testing I discovered the simply bracketing the inlet and outlet pipes to the wall behind does the trick however I understand...

Just reporting back on some quick tests I managed this morning for those who may be interested. Firstly as far as pressure or lack of it...

Thanks Lard, Space is my real issue until I can convice the better half that an workshop extension is a safety requirement !!, With the...

This is brill! I look forward to seeing how it goes for you. I've tinkered on and off for a while with my own idea for motorising the...

Thanks for the pictures and video. I guess time will tell how it works against the pull of the vacuum and dust in it. Pete

Thanks Pete, Fingers crossed. Ill feedback in a few days.

A video of the iris in operation during testing.

HI Pete, Literally just came off the design and manufacture stage, Ill test it in reality with the chop saw probably in a few days I...

Just finished this project ready for implementing in my workshed. A 3d printed iris dust gate to work with 40mm PVC waste pipe. You...

Hi, Has anyone came across a 3d printed dovetail jig/guide for a router table that theyve used ? I can find plenty but seen none that...

Absolutely , and as it was a freebie you can’t go wrong , give it a tidy up and a few test cuts , don’t rule out pre drilling any...

When you buy chisels get a diamond cone to sharpen them and take some time to polish them - it makes a world of difference with cheap...

Yes I kind of thought so too. I dont need much experience to realise the 1/2" bit it came with was probably a struggle for this machine...

From my limited experience with bench top Morticers the one you have seams quite small in terms of capacity . Mortice chisels are sold...

Thanks Bingy Man, I did a search but in all honesty a typical "man" search. Found some relevant threads now. Regards.