Quantcast
  • We invite you to join UKWorkshop.
    Members can turn off viewing Ads!

JBaz's latest activity

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

  • J
    JBaz replied to the thread Your opinion about logos..
    This is an innovative product that you are taking to market. As such your best sales tool is people using it and other people seeing it...
  • J
    JBaz replied to the thread Small Workshop Vacuum.
    If you go for a shop vac, I find the power tool socket really useful. I invariably use it set so that the shop vac comes on when you...
  • J
    Paper strainers and Sainsbury's soup pots (the wife likes the soup). These are OK with cellulose thinners (they don't disintegrate)...
  • J
    JBaz replied to the thread Any advice on MDF variants?.
    If it's any use, I get all my MRMDF from Vexgold at Thurmaston, LE4 8BB. It's pretty much all they sell. They certainly have Medite...
  • J
    JBaz replied to the thread Rutland chuck.
    I used ordinary rubber feet screwed in upside down. I also use a cone of softwood mounted on a live centre to keep light pressure on...
    • IMG_5304.JPG
    • IMG_5306.JPG
  • J
    JBaz replied to the thread Drawer slides.
    If you are using mechanical runners, they need the drawer to be narrower than the opening (usually by 12mm each side) to allow the...
  • J
    JBaz replied to the thread Method of joining simple bookcase.
    Coming back to the 900mm wide bookcase, for a painted finish MDF (Moisture Resistant preferably) will do a good job provided the shelves...
  • J
    I get mine sharpened at Oswald Cox in Leicester. Their collection and delivery service comes out as far as Syston for sure, but I don't...
  • J
    JBaz replied to the thread we are wrong.
    Droogs Nice one. How about the second floor though?
  • J
    I should have another look at the cost of running electric underfloor heating as the primary heat source. I have installed it in a...
  • J
    I've had a Felder table/panel saw for many years now and have tried a number of different Felder blades, which I found to be less than...
  • J
    JBaz replied to the thread we are wrong.
    With the British weather, building the roof first makes a lot of sense, especially if you want to use exposed structural timbers...
  • J
    JBaz replied to the thread Chisel sharpening on a budget....
    If you get into turning, you are likely to want a CBN wheel and a 250 Watt bench grinder will not do the job. I ended up buying the...
  • J
    I have a shelf in my shower (to put the toiletries on) and used Corian. You can work it quite easily with a router and if you need to...
    • IMG_5279.JPG
  • J
    JBaz replied to the thread Which welding rod?.
    Roy I'm basically a woodworker and have the 3 phase for my machines. A couple of years back, on a whim, I bought a metal lathe...
Top