UKworkshop.co.uk

Help Support UKworkshop.co.uk:

H
Reaction score
6

Latest activity Postings About

    • H
      Humf replied to the thread Garden room project.
      Thanks for your input Morq and Mike. Will reply properly when I’ve had chance to consider.
    • H
      Humf replied to the thread Garden room project.
      Anyone seen these insulated panels before? I’m not really interested for the main structure but they sell them as roof panels only to be...
    • H
      Humf replied to the thread Garden room project.
      Thanks both. Currently working on a version that sticks with the main piers as shown (440 x 440) every 2.4m but adds single blocks (220...
    • H
      Humf replied to the thread Garden room project.
      If I’ve got my calcs right, then the spans between piers are currently: 2400 - 220 - 220 = 1960 Which I think is ok for 6x2 at 600mm...
    • H
      Humf replied to the thread Garden room project.
      The blocks I have planned are the large high density hollow blocks. I have quite a few remaining from a professionally built retaining...
    • H
      Humf replied to the thread Garden room project.
      I'm running with this idea and trying the building slightly shorter, at 8.4m x 3.6m. This leaves 1.2m of covered decking. I'm also...
      • garden room v5 (1).png
      • garden room v5 (2).png
    • H
      Humf replied to the thread Garden room project.
      I'm gradually finding my feet with SketchUp. Very early days so far and I'm sure there's things I'm not doing as quickly and accurately...
      • garden room v5.png
    • H
      Humf replied to the thread Garden room project.
      Thank you for your reply - really appreciated and lots there to consider. The architect has been doing lots of work for us on a major...
    • H
      Humf replied to the thread Garden room project.
      Sounds good Torx. What software are you using?
    • H
      Humf replied to the thread Garden room project.
      Exactly. Offcuts is an option as you say. Of course, 2700mm osb solves it nicely. Might make a few enquiries tomorrow.
    • H
      Humf replied to the thread Garden room project.
      Unless I’m missing something, none of the other options (400 / 600 / 16”) result in economical cuts to the PIR? Only the 450mm centres...
    • H
      Humf replied to the thread Garden room project.
      A flaw in the plan… Just realised that although my 3.6m x 2.4m framework panels work perfectly for minimising cuts to studs, plates and...
    • H
      Humf replied to the thread Garden room project.
      Sorry the Egger T&G is 22mm
    • H
      Humf replied to the thread Garden room project.
      Just sketched out a rough version of a design for the floor. I previously used 18mm ply (2440 x 1220) but as I’m trying my hardest to be...
      • 5B1E93B9-DC35-4822-8A91-28C3BC9B706F.jpeg
    • H
      Humf replied to the thread Garden room project.
      Interesting thought. But I’m keen to keep everything simple. SIP panels are certainly appealing (I’m thinking rigidity and insulation...
  • Loading…
  • Loading…
Top