Recent content by Hemsby

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. H

    Sorry to be leaving

    While I welcome and embrace change, after a few days of reading posts on the revised site, trying to cope with the background colours particularly the white I have come to the conclusion that I am unable to view the pages without “visual discomfort” I have therefore reluctantly decided that I...
  2. H

    Enough to give them the hump

    https://www.npr.org/sections/thetwo-way ... injections :roll: :roll: :roll: :roll:
  3. H

    Record PT260 Planer thicknesser spare parts and thoughts

    Result =D> =D> =D> =D> =D>
  4. H

    Record PT260 Planer thicknesser spare parts and thoughts

    How is the thicknesser now with the new belt :?:
  5. H

    ELEKTRA BECKUM 315 BAND SAW ISSUE

    No probs :) The only reason I replaced the complete guide assemblies was due to the upper guide brackets needing continual repair due to their age resulting in fatigue fractures of the castings. Their actual operational function was fine. You still have the original lower guide assembly (2...
  6. H

    ELEKTRA BECKUM 315 BAND SAW ISSUE

    Yes it is the 315 but as I said the guides are “aftermarket“ (replacement) The complete kit cost £65
  7. H

    ELEKTRA BECKUM 315 BAND SAW ISSUE

    Although these guides are aftermarket the blades positions were relative in the original E/B guides. This shows the position of a ½ inch blade on the top wheel (on the bottom wheel the teeth are at the front edge of the aluminium) Top right Top Left Bottom right Bottom left Bottom Center...
  8. H

    Project Burnout

    +1 Thought it was just me :)
  9. H

    Automatic log out.

    Ok again :!:
  10. H

    Amazing product

    Great product also available in various wood grain finish :) :) :) Wow factor starts 1min into video https://www.youtube.com/watch?v=z1RMVG5 ... F&index=45
  11. H

    Automatic log out.

    Auto log in seems to have gone again just now!!
  12. H

    ELEKTRA BECKUM 315 BAND SAW ISSUE

    Do you have the E/B instructions? If not I can email you a copy. It is not brilliant but may be of some use
  13. H

    ELEKTRA BECKUM 315 BAND SAW ISSUE

    Forgot to mention, don’t be surprised if the blade runs in different positions on the top and bottom wheel. FWIW just looked in the manual and they do just say track “the blade” central on the tyre. No specific mention of the gullet position. Will post some pictures tomorrow if you still need them
  14. H

    ELEKTRA BECKUM 315 BAND SAW ISSUE

    I do have the same saw and you need to track the blade forward on the wheels. Ideally the centre of the blade, (not the gullet) should be approximately central on the tyres.
  15. H

    Automatic log out.

    Yes. Experienced same problem few times in one day last week for no apparent reason then mysteriously now ok again,
Back
Top