Recent content by h2ostartup

Thanks for that MilesH, I like the approach non intrusive. No issues with heat build up on the motor? I like the fact that there's no cutting the lower panel for the 100mm hose adapter. Cheers

Last followup to this thread as the re-assembly of the saw is completed with the return of the motor from the rewind shop. Incidentally the motor it turns out had a lug strap that was cracked causing the issue. Motor checked out OK otherwise. As mention in the thread earlier I went ahead with...

Hello just a follow up to the issue on the screw bearing. After some thought I did release the threaded stud listed as item 70. Once this was released the whole of the screw bearing was able to be pulled out. Huge lesson learned here as prior I had removed the spring pins in order to pull...

Hello, First posting, here it goes. Firstly I must say that the forum has been helpful in getting me this far. I recently thought to upgrade to an old classic and for several reasons I picked an Wadkin 10". The saw was known not to run and the motor is out getting rewound, so I figured I...