Recent content by diviy

If you have a set of good hss tools stick with them How much experiance do you have turning wood .If you are starting out there is a three carbide chisel`s that will get you going . Get a proper grinding wheel and a grinding jig set .If you have any questions pm a contact number and we can have...

There are some great videos on You tube regarding bandsaw set up . Make sure you have a full face vizor and dust maskhttps://www.screwfix.com/p/jsp-force-8-mask-respirator-with-press-to-check-filters-p3/1863f what type of chisels do you have carbide one or hss if you have hss you will need a...

managed to get 18mm osb3 board for two quid more any advive or suggestions as getting it saturday .One thing not sure on is battern space`s as it now 18mm board Cheers Gerry

what thickness flooring should i look at also I have been given load of Protect VC Foil Ultra sheeting today would that be worth lying on the floor concreate allready had a dpm in it . so i was thinking of layer of Protect VC Foil Ultra then 25mm Polystyrene Sheets with battons at 18" centre...

After seven years my works shop in mearly finished just windows to go in .It is a single block buid on a 10" concreate base with a dpm in it . So as it is all empty I am thinking of insulating the floor my idea is 25mm Polystyrene Sheets with batterns then a 11mm osb floor on top. do you think...

Picked up a bench grinder that has a 50mmx 686mm size belt at one end Any advice what grit to go for and can you shartpen wood turning hss chisels with it ? Also need a 150mmx 12.7mm stone would a the white ali stone better what would you recomend please ? These are the specs of the grinder...

I have been given a Metabo Elektra Beckum TKHS 315 Table saw . But the saw only has a small half length fence . So any idea on fitting a better fence so I can make a cross cut jig to fit it Cheers Gerry

Cheers looks perfect any Idea if a red Henry will do the job or suggestions please

Looking for a dust extractrion that i can connect to a 45 gallon plastic drum i can get them free any advice gerry

I have been lucky enough to be given a Elektra Beckum TKHS 315 table saw all that is missing is the metal extention table going to be doing all types of cutting so any recomendations on what blade to go for medically retired so funds are tight so looking for best value for money blade . Cheers...

I live in Swansea Pete AES the rehab/physio afterwards is the worst bit 6 mths of rehab minimum hydro pool three times a week plus gym workouts with the physio been there three times it is not going to beat me.

After having the week from hell with my back finally saw my spinal surgeon it know looks like I need another two spinal operations so that will be five in total and then also having major hassle from the DWP to top it off . The favour I am after is could someone knock me up some feather...

Sorry I ment machine screws just want to know if 4mm diameter machine screws are ok to use ?

The router base has 4mm threaded holes

Will four 4mm screws be ok to fix my 1200 watt router to my trend table . Cheers Gerry