UKworkshop.co.uk

Help Support UKworkshop.co.uk:

B
Reaction score
1

Latest activity Postings About

    • B
      bertterbo replied to the thread MFT tops.
      I think there is a market for someone on ebay (or ideally a simple website) to produce MFT tops that allow you to choose the hole...
    • B
      bertterbo reacted to Ttrees's post in the thread Bandsaw blade flutter with Like Like.
      If you've gone beyond the threshold if using these blades for cutting curves Helpful diagram stolen from Deema's recent postings...
    • B
      bertterbo reacted to Distinterior's post in the thread Plunge saw - battery or corded? with Like Like.
      I believe that was stated by some users from the USA and people that are used to 110v on UK building sites......The 110v saws are known...
    • B
      bertterbo replied to the thread Bandsaw blade flutter.
      I know the blades are twisted, I mentioned that in the first post. So I think I have the same situation as you, an error in the way...
    • B
      I've heard a few cases where the battery saw is actually more powerful than the corded version, I believe the TS55 is just one example...
    • B
      bertterbo replied to the thread Bandsaw blade flutter.
      So are we saying that even if the blade is twisted, enough tension should straighten it out? so even if it did get a little skewiff as I...
    • B
      bertterbo reacted to Spectric's post in the thread Bandsaw blade flutter with Like Like.
      If the 300 is anything like the 400 then the inbuilt tension scale is as much use as a chocolate teapot, with a 3/4 blade tensioned so...
    • B
      bertterbo replied to the thread Bandsaw blade flutter.
      It's a BS300
    • B
      bertterbo reacted to Spectric's post in the thread Bandsaw blade flutter with Like Like.
      You mention what blades you are using but not what machine unless I have overlooked that info, it may help to know make and model...
    • B
      bertterbo reacted to deema's post in the thread Bandsaw blade flutter with Like Like.
      @bertterbo may I suggest you read the thread I’ve suggested, using the data and method evaluate your machine and if there are still any...
    • B
      bertterbo replied to the thread Bandsaw blade flutter.
      Why would it be OK with new blades then? Even new blades that are wider and would require more tension?
    • B
      bertterbo reacted to Ttrees's post in the thread Bandsaw blade flutter with Like Like.
      I thought I might have had the same issues before, and chased my tail for a long time and had a long slog with a misaligned machine...
    • B
      bertterbo replied to the thread Bandsaw blade flutter.
      Pretty sure it's not tension. I have wound the tensioner until it's almost too stiff to turn. Far more tension than I normally would...
    • B
      bertterbo replied to the thread Bandsaw blade flutter.
      It's not the bandsaw setup as it works fine when the blade is new. It's only after I have stored it for a while and then use again I...
    • B
      bertterbo replied to the thread Bandsaw blade flutter.
      I do it this way, then add a bit of masking tape to keep them from uncoiling. Definately enough tension.
  • Loading…
  • Loading…
Top