Recent content by AdamM

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. A

    Glazed units

    1thanks all v much for advice, Adam
  2. A

    Glazed units

    I am approaching the end of a casement windows project and am looking for doubled glazed units. Does anyone have advice on a good UK supplier? Thanks, Adam
  3. A

    Asbestos

    Many thanks, Adam
  4. A

    Asbestos

    I am removing a corrugated asbestos roof {fully hazmatted up !) and have not yet booked a removal and disposal service. Does anyone have any advice for getting the best outcome? The prices seem to vary wildly. Large quantity - about 80m/sq. Thanks, Adam
  5. A

    Tape measure

    V good point, thanks
  6. A

    Tape measure

    Colin, not daft at all...i am really looking for multi-purpose benefits. I am building a green oak barn, so it will end up with me up a ladder and get dropped + general carpentry + cabinet making. I always used to like the steel cased Stanley tapes, but they have stopped making metal cases. The...
  7. A

    Tape measure

    Many thanks, advice much appreciated.
  8. A

    Tape measure

    I have dropped another tape measure, and it has shattered Does anyone have a strong views on a replacement? Looking for 3m or 5m ideally, with a metal case. Thanks
  9. A

    Drilling bathroom tiles.

    Another small tip, get a used envelope and masking tape. Carefully remove the envelope flap. Stick the envelope below the drill point to catch 90%+ of the drill waste.
  10. A

    Drilling a straight 20mm hole through 250mm oak gate post.

    I drilled a gate post last week. This seemed to work OK (1) I used my pillar drill tthrough a piece of was 2x4 as a guide (2) clamped this to the hinge side of the gate-post as a guide (v impt) (3) started drilling (4) removed the bit of 2x4 and completed the hole. Seemed work OK.
Back
Top