robertlaurenson
Established Member
Thought I would start a new thread as the other one is quite old and people may not see it.
Hi all,
I'm away back offshore for two weeks but the bed is nearing completion and I'm fairly happy with the results.
Any ideas on what to use to finish this would be appreciated, torn between a few things just now, but the main contenders are either Danish oil or Osmo Polyx oil.
After all the discussion about KD fittings, as you will see from the last picture I made up a couple of Ash blocks, one overlapping the joint with two coach bolts, glued and screwed to the inside rail of the side rail and corners, seems to work alright.
Have attached several photos as is, and more of the build and the simple jig I made for floating tenons.
Thanks
Robert
Hi all,
I'm away back offshore for two weeks but the bed is nearing completion and I'm fairly happy with the results.
Any ideas on what to use to finish this would be appreciated, torn between a few things just now, but the main contenders are either Danish oil or Osmo Polyx oil.
After all the discussion about KD fittings, as you will see from the last picture I made up a couple of Ash blocks, one overlapping the joint with two coach bolts, glued and screwed to the inside rail of the side rail and corners, seems to work alright.
Have attached several photos as is, and more of the build and the simple jig I made for floating tenons.
Thanks
Robert
Attachments
-
20220329_133107.jpg117.4 KB · Views: 41
-
20220329_133121.jpg134.1 KB · Views: 44
-
20220329_133128.jpg113 KB · Views: 40
-
20220329_133140.jpg123.4 KB · Views: 39
-
20220329_133152.jpg121.3 KB · Views: 42
-
Screenshot_20220330-143920_Gallery.jpg51.4 KB · Views: 41
-
20220326_101135.jpg119.4 KB · Views: 41
-
20220326_101125.jpg118.1 KB · Views: 39
-
20220326_101108.jpg131.5 KB · Views: 35
-
20220326_101059.jpg129.5 KB · Views: 32