Hi woodworker,
I posted this on woodnet, too, but because it is an english saw, I think I may post this here, too.
Together with Alex, a felow woodworker from Hamburg, Klaus and I started to make gents saws. So this is my new saw with a padauk handle and a brass tang – both made by Alex
Blade is 8" long
Cutting depth: 1 1/8"
Blade thickness: 0.012"
Pitch: 18 tpi rip
Alex turned the handle and formed the tang:
better view on the tang:
Now Alex has to get a saw and than all the other, who wants one.![Smile :) :)](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Cheers
Pedder
I posted this on woodnet, too, but because it is an english saw, I think I may post this here, too.
Together with Alex, a felow woodworker from Hamburg, Klaus and I started to make gents saws. So this is my new saw with a padauk handle and a brass tang – both made by Alex
Blade is 8" long
Cutting depth: 1 1/8"
Blade thickness: 0.012"
Pitch: 18 tpi rip
![DSCN0174.JPG](https://proxy.imagearchive.com/835/835225318a7a462fe49c96d0f15dd58c.jpg)
Alex turned the handle and formed the tang:
![DSCN0176.JPG](https://proxy.imagearchive.com/f6f/f6fa15ff00afdaea2f26f9b6c1da0526.jpg)
better view on the tang:
![DSCN0177.JPG](https://proxy.imagearchive.com/4ea/4ea972e5fe8ff3fe8c318feab29ed1d0.jpg)
![DSCN0178.JPG](https://proxy.imagearchive.com/836/836d5b0c267710226ca44efcaaf9743b.jpg)
![DSCN0179.JPG](https://proxy.imagearchive.com/d4f/d4f4e373a5b7db8f1942ffa53590a3d5.jpg)
Now Alex has to get a saw and than all the other, who wants one.
Cheers
Pedder