Long driver bits

[transatlantic]

I bought some off ebay for about £10 and they're like cheese so looking for some recommendations for around the £20 mark. I only ever really use pozidrive bits, so something in a few different sizes would be fine.

 

[garethharvey]

Can’t help with the bits, but I always avoid eBay, it is so full of cheap Chinese tat, it’s unreal.

 

[Weaversdad]

Try this .......

https://www.screwfix.com/p/erbauer-magn ... 50mm/85559

I've got all three sizes in the bottom of the driver box and are very useful, of course best benefit is you can stick with your usual pozi bits
Pete

 

[JSW]

Love the freudian slip!

 

[transatlantic]

Love the freudian slip!

Fixed!

 

[transatlantic]

Try this .......

https://www.screwfix.com/p/erbauer-magn ... 50mm/85559

I've got all three sizes in the bottom of the driver box and are very useful, of course best benefit is you can stick with your usual pozi bits
Pete

Good idea!

 

[xy mosian]

Hi, take a 12mm steel, bar drive fit a magnetic holder into one end, cut to about 250mm, grind three flats onto this end and you have an extension drive bar. Managed for me for years. There can be a problem if the screw is at the bottom of a tight hole, in which case a cheap long driver from wherever with the handle removed, cut off, works well.
HTH xy

Sorry, just clicked the link, seems I've been beaten to it.
xy

 

[woodywoodwood]

I need a long bit for a ryobi collated screw gun. Do you think I can find one?

 

[Dokkodo]

at car boots I have found a few of these sorts of things in various sizes, usually with more grub screws, which would be better presumably, yet to find an excuse to use one though

https://www.toolfastdirect.co.uk/acatal ... gLHHfD_BwE

 

[oakmitre]

I use the Wera 50mm, they make a 152mm version but it's around £5.

 

[Jamster21]

Was just thinking Wera - picked a couple up from Toolstation the other day (in a hurry) and seem good quality. Read about a bit and they seem reasonable...

I use the Wera 50mm, they make a 152mm version but it's around £5.