Extractor pipework

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

No skills

Established Member
Joined
6 Feb 2011
Messages
2,559
Reaction score
3
Location
Hanging by my fingertips
Afternoon all,
I need to run some extractor pipes for some recently purchased dust extractors.

I have a hvlp bag type and a hplv cannister to plumb in - I was going to use 110mm soil pipe for the hvlp.
Do I have to use 110 again for the cannister or can I drop down to 60/50mm pipe and keep reasonable performance from it?

There will be a 3m length of whatever size then a (short as possible) bit of wired flexible pipe that I can swap between machines.

What do you think?

Cheers.
 
The thing with ducting is to keep it a big as possible for as long as possible.
 

Latest posts

Back
Top