rostrevormensshed
New member
- Joined
- 14 Mar 2023
- Messages
- 1
- Reaction score
- 0
Hello
I hope someone can help with a solution to our problem. We are a men’s shed operating in Rostrevor, N Ireland. We recently bought a DWE7492 table saw which looks like a good unit for our needs.
However connecting to our 102mm dust extraction is proving to be difficult.
The main outlet is 65mm outside diameter while the crown attachment is 43mm. Therefore we need an adaptor with three different sized branches plus some 43mm interior diameter pipe.
Surely there must be others who have a dewalt saw with similar issues? We can’t be the only ones who have the same problem. DeWalt don’t seem to offer any connection points other than their own vacuum units, which isn’t an option for us.
I have searched the forums, but can’t find an answer.
Help!
I hope someone can help with a solution to our problem. We are a men’s shed operating in Rostrevor, N Ireland. We recently bought a DWE7492 table saw which looks like a good unit for our needs.
However connecting to our 102mm dust extraction is proving to be difficult.
The main outlet is 65mm outside diameter while the crown attachment is 43mm. Therefore we need an adaptor with three different sized branches plus some 43mm interior diameter pipe.
Surely there must be others who have a dewalt saw with similar issues? We can’t be the only ones who have the same problem. DeWalt don’t seem to offer any connection points other than their own vacuum units, which isn’t an option for us.
I have searched the forums, but can’t find an answer.
Help!