Simo
Established Member
- Joined
- 28 Mar 2009
- Messages
- 186
- Reaction score
- 118
Surplus to requirements, 3x bookmatched spalted English Walnut tops for electric guitar/bass.
I purchased these 2 years ago, they were dry when I brought them and they've been in my humidity controlled workshop since then. Although fairly solid for the level of spalting present, they will of course require some CA/epoxy to stabilize soft spots, splits etc. They are un-glued and will require (minimal) jointing. Each set has been drum sanded to 120 grit.
Approx Sizes:
A: 590mm long, 190mm wide (each half), 6.6mm thick.
B: 590mm long, 198mm wide, 6.75mm thick.
C: 590mm long, 196mm wide, 7mm thick.
SOLD
Prices include postage via UPS. Payment via PayPal or bank transfer.
They will be pallet wrapped to a scrap piece of mdf or chipboard to avoid damage.
I purchased these 2 years ago, they were dry when I brought them and they've been in my humidity controlled workshop since then. Although fairly solid for the level of spalting present, they will of course require some CA/epoxy to stabilize soft spots, splits etc. They are un-glued and will require (minimal) jointing. Each set has been drum sanded to 120 grit.
Approx Sizes:
A: 590mm long, 190mm wide (each half), 6.6mm thick.
B: 590mm long, 198mm wide, 6.75mm thick.
C: 590mm long, 196mm wide, 7mm thick.
SOLD
Prices include postage via UPS. Payment via PayPal or bank transfer.
They will be pallet wrapped to a scrap piece of mdf or chipboard to avoid damage.
Last edited: