Search results

http://youtu.be/dTcvmmOkqJI Regards Richard

Saw this on done deal and had to have it! A biesemyer fence is rock solid and for 150 euro couldn't say no. Was never happy with the fence on my sip 01332 table saw Will post pictures as soon as I get it fitted . Regards Richard

bought some really cool prints and want to mount them on mdf what glue should i use ? a contact adhesive that ud use for formica or will it run the paper poster? any advice appreciated regards richard

http://www.lidl.ie/en/Offers.htm?action ... l&id=26234 its rails are shorter 2 x 70cm so can only cross rip a sheet but buy a new blade this might not be half bad for the hobbiest woodworker. especially after all the festool debate recently I own a Ts55 but would be interesting to do a...

Hi folks, first up I hate working alone find it really hard to motivate myself to go out to the workshop. then once out their hard to not get distracted and go back in side. I have a pretty good set up with a table saw, temp router table, 12inch planer thicknesser, lathe, festool track saw...

hey folks my question is do i need to strip the old finish off its not peeling, the client wants its resin filled where it has some holes then epoxy poured afterwards. I know i need a water based sealer for the epoxy to properly apply is their anyway i can get their without removing the...

Hi folks just wondering does anyone use this program that runs off sketch up for setting up cut bills. i'm finding it very frustrating. just seem like i can't get the cabinets configured to the way we build so the cut list isn't accurate. two questions does anyone use it, if so do they like...

Hey all, Just thought some people might be interested these clamps r super strong don't have any flex and have a tightening mechanism which doesn't move on the piece like some of the bessy types. Heres the link if your interested http://www.tilgear.info/workholding/cla ... o-f-clamps Regards...

Hey folks wanna pick your brains thinking of making a set of bifold doors as a screen on a half covered patio. to keep the snow out! living in denver. just wondering what construction method is best, was thinking of possibly oak as my rail material and ply wood with oak veneer as the panel...

Hi all, thought you might be interested. I moved to denver and am going to be looking for a cabinet making job, in fine furniture if i'm lucky. so made up this page to be able to show possible employers my work still a few items to go up and hopefully will have future projects put on it as well...

Hi heading off to america next wed for a year wanna bring out my hand tools just weighed them and they weigh 16 kg whats the best way to bring them postage second plane bag?? plane bag costs 75 euro for 23 kg does anyone know any better ideas also wanna bring my golf clubs they cost 210 euro one...

Just a quick question How do you fit the Z in terms of jointing this is the dry fit of the mortice and tennons. the cross brace is going to be narrower to allow the lathes be nailed to it and in the rebate. I know the bottom rail should be narrower as well to stop water pooling but too late...

Hi all Have got my saw blade parallel to the mitre tracks was just wondering how you get the sliding carriage set up. do you just loosen the bolts holding down the cast top and set it to the slider. I havent got the manual and am at a loss to the best way. bought it second hand. Thanks

Hi All Just set up my SCM Minimax FS30 Planner Thicknesser. when planning a flat wide board it was between .5 of a mm, one side was taking off a little more but thicknessing will fix this it is out just over .1 of a mm is that accurate enough got it fairly quickly that good but scared i'd make...

both at 800 euro price point which one is better??? one scm and the other startrite heres the 2 links http://www.donedeal.ie/tools-for-sale/bandsaw/5335512 http://www.donedeal.ie/tools-for-sale/w ... le/5329271 I'm a hobbiest wanting to do fine furniture

Thought this was interesting Was in Denver Colorado and needed to do some work on my sisters new house, but had no tools found this place on the internet. it has a wood shop, metal shop, auto shop and cncs for you to play with i payed 20 dollars for an hour and just had to sign my life away...

Hi all Just looking for some opinions things i'll have to look out for won't be picking it up for 7 weeks probably as I am going to america next wednesday. Heard good things about it just wanna know the general consensus. Picked it up for 950 euros. Thanks in Advance Richard

Sorry my image won't load. The joint is a compond mitre Y with the 2 branches spliting at an angle of 120 degrees and slopeing down at 5 degrees the centre rail remains horizontal. Without a picture I know its hard to visualise. I'll email thepicture to anyone if they could attach it to the...

Hi All I live in Ireland and can't find johnstons floor paste wax. so what type of wax do we want to put on our table saws. what is needed natural or a chemical one that will dry and stick to the cast iron. All I know is to make sure its silicone free as this will get on pieces cut on the table...

Richard here Anyone got any experience with them I have the opportunity to buy a sliding table saw spindal moulder combi. second hand for 1100 euro a lot of money for me but I want a good saw can't find any reviews online for them its the tsi super 1600 saw along with my festool tracksaw think...