wallace
Established Member
The crown guard had some holes drilled into it and some damage, so I thought I would try and braze it.
As I was brazing I noticed a hair line crack appear. I think it would of been better doing it with the mig using bronze wire, then their wouldn't have been so much heat.
A bit fugly
The nose piece was missing but I had one in my stash.
This must of been off a smaller saw because the bar is too small for a pk, luckily again I had a longer one in my stash
I needed a table stop for the slider
The knurled knob is not my work, I had a batch of them done off doubleboosts pal who does the cnc stuff
No presests in the table
![Uc4R6YE.jpg](https://proxy.imagearchive.com/e09/e09ba5311811859c5ad6f88d90148637.jpg)
As I was brazing I noticed a hair line crack appear. I think it would of been better doing it with the mig using bronze wire, then their wouldn't have been so much heat.
![lceqF4G.jpg](https://proxy.imagearchive.com/9a9/9a9a789bb58520ba49af1840cb0a916c.jpg)
A bit fugly
![zJx0cV7.jpg](https://proxy.imagearchive.com/a24/a24587d947ba56b21a94c278b308fd7e.jpg)
The nose piece was missing but I had one in my stash.
![pnVCilU.jpg](https://proxy.imagearchive.com/3e9/3e97ff4974967ad58dd2fd7c39528256.jpg)
![sINlrVL.jpg](https://proxy.imagearchive.com/ebf/ebfdf8fe0722fd79d21128b535f4c241.jpg)
![9CV0cHa.jpg](https://proxy.imagearchive.com/f36/f361967ff7d16c34989ed855f83868fc.jpg)
![eQ4lZZn.jpg](https://proxy.imagearchive.com/717/717da73cc93744427acd6d2241301956.jpg)
This must of been off a smaller saw because the bar is too small for a pk, luckily again I had a longer one in my stash
![yn7P6nL.jpg](https://proxy.imagearchive.com/97f/97f43a948c11828bea74067b991e8cb9.jpg)
![mRHS5YQ.jpg](https://proxy.imagearchive.com/5fe/5feed4553f9f66fb9d827b64fb3c9a63.jpg)
I needed a table stop for the slider
![UjMuoLl.jpg](https://proxy.imagearchive.com/8d6/8d628c102473038b39df44e217180232.jpg)
The knurled knob is not my work, I had a batch of them done off doubleboosts pal who does the cnc stuff
![GigXfAt.jpg](https://proxy.imagearchive.com/4e3/4e32a41a523f4d85c6390f8cc9d19ba6.jpg)
![XqYBdtU.jpg](https://proxy.imagearchive.com/7d0/7d013feb43e28c6dc6e807e5edfa9a9f.jpg)
![ESCUB1Z.jpg](https://proxy.imagearchive.com/298/2987653a5acdaeb11679adff5d285fd6.jpg)
![VWsLmO9.jpg](https://proxy.imagearchive.com/1df/1df029d61704304492ec4c19acae1a18.jpg)
![et6UDIK.jpg](https://proxy.imagearchive.com/c8c/c8c9a74388e069f246f4369edd99a8fe.jpg)
![rA7YjfJ.jpg](https://proxy.imagearchive.com/ab1/ab16729fbb87d062656d34450e2eb3c2.jpg)
No presests in the table
![yUWxgxn.jpg](https://proxy.imagearchive.com/699/6992ff93d9eaa12d4888ab8c2a65d627.jpg)
![O6ZT8lU.jpg](https://proxy.imagearchive.com/5b5/5b511dabbb82035e72c1026206e48564.jpg)
![g3GDJut.jpg](https://proxy.imagearchive.com/d20/d20419b2824a102ce6f94d3a2ff00313.jpg)
![XbwY0lu.jpg](https://proxy.imagearchive.com/9ad/9ad54fbe8311292beb40e75a28ef5ac4.jpg)
![5YKb1k6.jpg](https://proxy.imagearchive.com/c4d/c4d8dce0e5c47979f321c8b0f24f4a06.jpg)
![ZW0IhsN.jpg](https://proxy.imagearchive.com/70b/70b20381319284f47232ea07ffb637d5.jpg)
![et6UDIK.jpg](https://proxy.imagearchive.com/c8c/c8c9a74388e069f246f4369edd99a8fe.jpg)
![IeA3qIm.jpg](https://proxy.imagearchive.com/857/8574f4bbadab56844aa2b20825c11176.jpg)
![vCQ7qBr.jpg](https://proxy.imagearchive.com/c8c/c8c91947d97011520bd5250cc235284d.jpg)
![qTPfm54.jpg](https://proxy.imagearchive.com/fe9/fe9db86d30e34527efd00a0bdc60583a.jpg)
![IOfpytG.jpg](https://proxy.imagearchive.com/d76/d76e456d9c3b4d1346a8f100d81da100.jpg)