Melinda_dd
Established Member
What's occurring !
Are you fitting the inside out yet? Come on we want more pictures!
Are you fitting the inside out yet? Come on we want more pictures!
Yet another shed build
- Thread starter flying haggis
- Start date
Help Support UKworkshop.co.uk:
flying haggis
Established Member
Melinda_dd":2yt1uz2z said:
Hi Melinda
yes i have been fitting it out and yes I should have taken some more photos. I forgot, so i will slap my own wrist and I will take some just for you.
flying haggis
Established Member
Right then, especially for Melinda, and for everyone else. Here is where i have got to so far. Insde painted with two coats of Dulux emulsion that I got for £1/5L ! Glazed with polycarb twinwall gutter up and as for the inside lights fitted, partial socket electrics in, tv and sat receiver in (for the radio channels!) benches and shelving in. Now i can start to empty the garage and put all my junk in the shed from whence it came many moons ago.
Attachments
Melinda_dd
Established Member
Now that's a workshop and a half!!! thanks for the pictures 
colinc
Established Member
Hi, what clear height have you got inside? Am interested because I am moving house tomorrow and currently talking with the planners to see if they will let me go higher than the 2.5m limit for permitted development in the location I want. If they make me stick to 2.5m it does compromise the internal height a bit.
Colin
Colin
flying haggis
Established Member
Hi Colin
internal height at the very tallest at the rear is 2.16, the lowest at the front is 1.90 and the clearance between the bench edges is approx 2.00
the shed was designed to be 2.475m from concrete slab to highest point :wink:
internal height at the very tallest at the rear is 2.16, the lowest at the front is 1.90 and the clearance between the bench edges is approx 2.00
the shed was designed to be 2.475m from concrete slab to highest point :wink:
