• If you have bought, sold or gained information from our Classifieds, please donate to UK Workshop and give back.

    You can become a Supporting Member or just click here to donate.

Workshop closure

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Leebo914

Established Member
Joined
30 Jun 2012
Messages
106
Reaction score
0
Location
Newton Stewart
Due to a new business venture, I am sad to say that I will no longer be able to continue my hobby of woodwork and I am now selling all of my tools. Many of these have had very little to no use as I have only very recently completed my home workshop. I do have quite a few tools to sell and will upload pictures over the next few days. To kick it off I will start with a bit of Festool.


STILL AVAILABLE

Bessey BESUK60 600mm bar clamp x 4 @ £15 each
Lie Nielsen Boggs spokeshave - Flat VGC: £80
The top half of the Festool boom arm: £50
Festool CTL midi still on the first bag: £220
Veritas carcass saw, unused boxed £50
Qiangsheng block plane, new unused boxed:£40
Jet JSSG-10 Slow Speed Wet Sharpener with angle setting jig, diamond truing tool, gouge jig, machine cover, stone grader, flat platform. Only been trued once and never used for sharpening anything. £180
Hitachi NT65GB Cordless Gas Finish Nailer + nails. Only fired 3 nails with it as new.: £150
Framing Nailer, untested as I never had a compressor capable of firing used. £50
Multico 16amp 3hp 12" Ripsaw, been re-wired + tenon carriage: £250
Veritas Journeymans mallet unused in the box: £20
Dewalt 230V 1/4-inch Combination Plunge/ Fixed Base Router + trend router bit set, used once: £200
Axminster HBS310N very light use + 2 spare blades: £250
Pfeil 19piece set of mid-sized carving chisels in Pfeil fabric tool rolls, new condition: £300
Electra Beckum spindle moulder - the green one without the sliding table, comes with a new rebate block to suit: £220

SOLD PENDING PAYMENT



SOLD ITEMS

Incra router table fence: £50 SOLD
Veritas burnisher & card scraper set: £10 SOLD
Mirka Deros sander in systainer with 150mm pad & a few abrasive discs - Unused: £250 - SOLD
Veritas router plane + fence + extra cutter - Unused in box :£130 SOLD
Veritas dovetail saw, very light use boxed: £40 SOLD
Lie Nielsen block plane: £100 SOLD
Knew concepts 8" coping saw + blades, unused in packaging: £50 SOLD
Veritas small router plane, unused boxed: £25 SOLD
Marple's vintage router plane: £40 SOLD
Quangsheng No3 plane: £40 - SOLD
Qiangsheng No62 low angle jack plane unused boxed:£80 SOLD
David Barron 6" Square: £25 SOLD
veritas marking knife new unused: £10 SOLD
Veritas incremented marking gauge new boxed: £20 SOLD
Festool OF1010 had very little light use: £260 SOLD
Aurio rasps x 4 @ £50 each - SOLD
Veritas MK11 honing guide, unused boxed: £40 SOLD
Record No: 80: £30 SOLD
Festool Domino with domino systainer plus 2 extra boxes of 50mm domino's+ 5,6,8,10mm cutters vgc: £550 - SOLD
Metabo HC260c Planer thicknesser, only had very light use: £350
David Barron dovetail guide 1:7 & Japanese saw. Unused boxed: £35 - SOLD
Festool TS55 with guide rail and new splinter strip + 2 screw clamps: £300 SOLD
Worksharp 3000 + spare discs: £80 - SOLD
Incra T-rule- 300mm £30
Incra precision guaranteed 90 deg square: £50
Festool mft3 with 2no Axminster Quick Lever Clamps + 2no MFT clamps + Parf dog set large + small and new slop stop: £350
Used 27mm Festool hose: £40
Record wood vice: £20
Freud laminate trimmer: £30

All larger tools pickup only from postal area Dg86pj. Newton Stewart, others posted at cost.

Any questions, please ask

I will post pictures asap. Cheers, Lee
 

Attachments

  • P1000695.JPG
    P1000695.JPG
    251.5 KB · Views: 2,307
  • P1000696.JPG
    P1000696.JPG
    157 KB · Views: 2,306
  • P1000697.JPG
    P1000697.JPG
    261 KB · Views: 2,307
  • P1000698.JPG
    P1000698.JPG
    286.4 KB · Views: 2,306
  • P1000699.JPG
    P1000699.JPG
    249.8 KB · Views: 2,306
  • P1000700.JPG
    P1000700.JPG
    253.3 KB · Views: 2,307
  • P1000701.JPG
    P1000701.JPG
    234.2 KB · Views: 1,743
  • P1000702.JPG
    P1000702.JPG
    186.7 KB · Views: 1,742
  • P1000703.JPG
    P1000703.JPG
    185.5 KB · Views: 1,743
  • P1000706.JPG
    P1000706.JPG
    222.5 KB · Views: 1,742
could you post a pic of the Quangsheng no 4, and could I have first refusal on it, pending pics?

is it from workshop heaven?
 
would like to no more about buying the
Bessey BESUK60 600mm bar clamp
David Barron dovetail guide & japanese saw. Unused boxed
 
Location and price please for the TS55, incra rule and the square.
First refusal on them as well please.
 
marcros":n0nm5se7 said:
could you post a pic of the Quangsheng no 4, and could I have first refusal on it, pending pics?

is it from workshop heaven?

Yeah no probs marcros, i will get a picture posted in the morning before work. I am not sure if it came from workshop heaven as it was a gift, I will try and find out for you.

Thx Lee
 
LancsRick":2ge9cgjc said:
What's the router fence model please, I may be interested.

Cheers.

I am away from home just now but will check tomorrow and let you know, I will also post a picture of it.
 
basssound":u1emaz0o said:
Location and price please for the TS55, incra rule and the square.
First refusal on them as well please.

Hi Sorry, i should have stated in my posting. i am in Newton Stewart, in SW Scotland postal code Dg86pj.

Thx Lee
 
Shedman":1hyd964y said:
Am interested in the Bessey clamps (all 4). I see there's another post so second chance on those please!

Yeah not a problem, if they are still available I will get back to you.

Thx Lee
 
boschboy":18a6ecc7 said:
would like to no more about buying the
Bessey BESUK60 600mm bar clamp
David Barron dovetail guide & japanese saw. Unused boxed

Yeah sure, what can i help you with?
 
Hi Lee, could I please have second dibs on...
- Knew concepts coping saw + blades, unused in packaging: £50
- David Barron dovetail guide & japanese saw. Unused boxed: £35

And assuming that the “Veritas burnisher: £10” is the veritable burnisher for card scrapers could I please take that.

Could you please also send me a photo or a link to an example of the “Incra router table fence: £50” just so I know what type it is?

Much appreciated
 
Hi can I take the Mirka deros (assume it has both 125 and 150 attachments
Interested in aurio rasps if not already taken . Which ones are they please and what condition

Ian
 
Leebo914":4yoz8h03 said:
marcros":4yoz8h03 said:
could you post a pic of the Quangsheng no 4, and could I have first refusal on it, pending pics?

is it from workshop heaven?

Yeah no probs marcros, i will get a picture posted in the morning before work. I am not sure if it came from workshop heaven as it was a gift, I will try and find out for you.

Thx Lee

Lee

If you could check whether the lateral adjuster is pressed steel or fabricated, this will tell me enough about which version it is.

cheers
Mark
 
Back
Top