Christian A.
Established Member
Hi folks,
I just registered in this forum (see thread in the OT-board) and as there seems to be some interest in the pics I took at the „Holz und Handwerk 2004“ woodworking show in Nürnberg, Germany, I decided to post them. As the pics were taken in 2004 some of the tools that were brand new at this time are almost old today.
Although I called this post “show report” it isn’t really a report, it’s a collection of pics. The show covered a wide range of tools and machinery which didn’t get my interest (for example, CNC machinery) because I’m not familiar with this kind of stuff.
I hope you enjoy the pics as I enjoyed the show.
A shot of the Festool booth:
The new Festool OF 1400 router:
Improved dust collection, extremely simply router bit change due to an integrated ratchet, toolless copy ring change, etc.
The new TDK cordless drill with a very short chuck (you need special bits). Available in 12 and 15,6 V:
The new Festool Precisio pull push (trimming) jobsite table saw:
New Festool WTS 150/7 ROS with 7 mm stroke (for aggressive sanding):
RUWI – an innovative stationary routing system. This is neither a shaper nor a simple router table, it’s a table which holds up to 11 special router motor (exclusively designed for table use). You can change from one to another router within seconds.
The small unit:
Working at the large one:
The Mafell Duo Dowel tool (looks like a biscuit joiner but uses standard dowels, the tool drills two holes at the same time):
Flexible guide rail for Mafell circular saw (a 1400 mm rail can be stored in a Systainer along with the saw):
An Altendorf F 45:
Martin’s pendant:
The SCM booth:
A Panhans shaper:
Isn’t this a nice Kundig sander?
KBM sander:
A wood turner at the Magma booth:
That’s me looking at the Festool router:
I have even more pics to share but the download time was already as long as a good cup of coffee.
Thanks for looking!
Christian
I just registered in this forum (see thread in the OT-board) and as there seems to be some interest in the pics I took at the „Holz und Handwerk 2004“ woodworking show in Nürnberg, Germany, I decided to post them. As the pics were taken in 2004 some of the tools that were brand new at this time are almost old today.
Although I called this post “show report” it isn’t really a report, it’s a collection of pics. The show covered a wide range of tools and machinery which didn’t get my interest (for example, CNC machinery) because I’m not familiar with this kind of stuff.
I hope you enjoy the pics as I enjoyed the show.
A shot of the Festool booth:
The new Festool OF 1400 router:
Improved dust collection, extremely simply router bit change due to an integrated ratchet, toolless copy ring change, etc.
The new TDK cordless drill with a very short chuck (you need special bits). Available in 12 and 15,6 V:
The new Festool Precisio pull push (trimming) jobsite table saw:
New Festool WTS 150/7 ROS with 7 mm stroke (for aggressive sanding):
RUWI – an innovative stationary routing system. This is neither a shaper nor a simple router table, it’s a table which holds up to 11 special router motor (exclusively designed for table use). You can change from one to another router within seconds.
The small unit:
Working at the large one:
The Mafell Duo Dowel tool (looks like a biscuit joiner but uses standard dowels, the tool drills two holes at the same time):
Flexible guide rail for Mafell circular saw (a 1400 mm rail can be stored in a Systainer along with the saw):
An Altendorf F 45:
Martin’s pendant:
The SCM booth:
A Panhans shaper:
Isn’t this a nice Kundig sander?
KBM sander:
A wood turner at the Magma booth:
That’s me looking at the Festool router:
I have even more pics to share but the download time was already as long as a good cup of coffee.
Thanks for looking!
Christian
)
