Where to buy screws for flush hinges

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Rugbyjack2005

Member
Joined
18 Jan 2021
Messages
12
Reaction score
1
Location
Essex
I don’t like flush hinges as I can never source the correct screws for them. Usually they don’t come with screws and if they do, they’re often terrible. So, where’s a good place to source small screws for flush hinges? I typically use 50mm flush hinges so the screws need to be roughly 3mm x 20mm but the important thing is a small, counter sunk head. No preference on drive type, but probably slotted so the head isn’t too big.
 
Spax do a 3x20 pz1 that have thin enough heads for flush hinges. I think they do 2.5s too but these can pull through easily.. Good luck!
 
The hinge-tite ones Screwfix do seem OK, not that I've used many of them.
 
Back
Top