What size of chuck to get ?

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

woodfarmer

Established Member
Joined
10 Sep 2013
Messages
1,261
Reaction score
18
Location
poitiers
I am currently working on a project that requires me to mill some ratchet teeth on a round bar. I have decided to mount a rotary table on my toolpost but need to have a chuck on it to hold round bar of 52mm diameter minimum. (not long lengths). would the 65mm chuck with this table work? or do I need to get something bigger. I don't mind reversing the jaws if need be.
https://www.chronos.ltd.uk/product/rot1 ... jaw-chuck/

Thanks for your help
 
You won't be able to hold 52mm (or anything like) in the inside jaws of a 65mm chuck. You might just get away with it with outside jaws, but the Chronos offering in your link doesn't appear to be supplied with a set, and it doesn't look like the jaws are reversible.
RDG do something similar with outside jaws which may be more suitable.
 

Latest posts

Back
Top