Wanting to build a door for a glorified shed with a bit of substance

[el_Pedr0]

Hi @Glitch. Another question for you, if I may.

I'm getting round to doing the door and was wondering whether you knew the dimensions of the timber your joiner used for the door (perhaps still exposed on the inside?). It all seems very deliberate because the bottom ledge is markedly wider than the other bits, and middle ledge is wider than braces, etc.

So rather than doing a ton of research on what should be done, I was wondering if I could take a cheeky shortcut and just get the dimensions (thickness and width) of the ledges, braces and vertical bits from you please?

 

[Glitch]

Hi @el_Pedr0

The timber thickness is 44mm
The bottom rail is 190mm wide. The middle rail is 150mm
Everything else is 90mm

I don't know why the rails are different widths. Perhaps more like a traditional timber door rather than a basic framed, ledged and braced one.

 

[el_Pedr0]

Thank you! Saves me a bunch of time trying to educate myself.