M Millcottage Member Joined 30 Nov 2020 Messages 10 Reaction score 2 Location Ireland 30 Nov 2020 #1 Can anyone identify this please?
S SammyQ Established Member Joined 12 Apr 2005 Messages 2,603 Reaction score 315 Location A wee house on a hill 30 Nov 2020 #2 CK Zenses ( I think) drill-powered router substitute. Sam
M Millcottage Member Joined 30 Nov 2020 Messages 10 Reaction score 2 Location Ireland 6 Dec 2020 #3 SammyQ said: CK Zenses ( I think) drill-powered router substitute. Sam Click to expand... Thanks, but unsure how it would work. Somebody must recognise it .... please!
SammyQ said: CK Zenses ( I think) drill-powered router substitute. Sam Click to expand... Thanks, but unsure how it would work. Somebody must recognise it .... please!
S SammyQ Established Member Joined 12 Apr 2005 Messages 2,603 Reaction score 315 Location A wee house on a hill 6 Dec 2020 #4 Drill chuck goes onto open end of the spindle. Crude milling cutters are fitted on the other end, below the 'platform'. The handle is then used to pass the revolving cutter over a wood edge and the cutter forms a rebate or moulded edge. Sam
Drill chuck goes onto open end of the spindle. Crude milling cutters are fitted on the other end, below the 'platform'. The handle is then used to pass the revolving cutter over a wood edge and the cutter forms a rebate or moulded edge. Sam
M Millcottage Member Joined 30 Nov 2020 Messages 10 Reaction score 2 Location Ireland 7 Dec 2020 #5 Thanks, all resolved - not an attachment I'm needing or going to use besides I have no cutters for it.
Thanks, all resolved - not an attachment I'm needing or going to use besides I have no cutters for it.