Unicut 2

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

philpolish

Established Member
Joined
26 Jul 2004
Messages
112
Reaction score
0
Hi everybody
can anybody give me any advice on the unicut 2 radial arm device. I saw one at a show last year it looked well made. Has anybody out there got one or used one before. I just want it to trench with a router basically.
Thanks in advance Phil.
 
Hi Phil,

you'll find that when you have a question about a piece of kit you actually know the name of, then the Search page is your friend.

One of the threads you would have found is:
https://www.ukworkshop.co.uk/forums/view ... ght=unicut

I hope you don't take this advice the wrong way, I know I've asked some questions on forums and waited for days for a response that I could have found in the "back issues" so to speak.

Cheers

Martyn
 
Martyn, thanks for that; I came over all lazy, closely followed by forgetful :roll: , and failed to come back to this as I'd meant to. :oops:

Cheers, Alf
 
Back
Top