Triton tools - dust extraction

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

charlieboy

Established Member
Joined
19 Apr 2014
Messages
20
Reaction score
1
Location
West Sussex
I have the Triton TWX7 WorkCentre with the TWX7CS001 contractor saw and TWX7RT001 router table modules. Router table is fitted with a Triton MOF001 router. I also have a Triton TPT125 thicknesser. Just wondering what other members who have any of these Triton tools use for their dust extraction, and how effective it is.
 
Of the 3 I've only got the router so can't comment on the rest. For hand use, once I found a hose that fitted directly in the dust port I've no compalints, finding a hose was a PITA. Turns out a standard Numatic vacuum cleaner hose is a a good fit (32mm left handed). In a table I only use a fence port which is OK but a it would be better with a second extract from below.
 
Back
Top