Triton MOF001 1400w router problem.

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

RogerP

Established Member
Joined
7 Jan 2011
Messages
3,785
Reaction score
7
Location
Gloucester
I've had a Triton MOF001 for a few months and been happy with it - until now. The fine adjuster mechanism has failed and I understand there's a nylon cog that strips.

Anyone have a email address for Triton? I've tried a couple through websites but had no response, is there a known working email address?

Thanks.
 
Have you tried backwards winding? My triton, once you'd raised it with the fine adjuster it needed to be fully backed off every once in a while.
 
Thanks, yes I've tried that but I can see and feel the cog/worm slipping and jumping as they take up pressure.
 
The nylon part has been changed for a brass one. The nylon one has a tendency to chew up(How do I know? :( ) If I remember correctly got the replacement (Part no. TRA378 ) from here:

Toolstream Ltd
Boundary Way
Lufton Trading Estate
Yeovil
Somerset BA22 8HZ

Tel: 01935 382222

Give them a ring to confirm

I found this guide by Argee (member here) invaluable :

http://www.raygirling.com/dismmof1.htm
 
Thanks very much for that John, and Argee for the excellent "how to", I'll phone Toolstream after the weekend.

Roger
 
Back
Top