• If you have bought, sold or gained information from our Classifieds, please donate to UK Workshop and give back.

    You can become a Supporting Member or just click here to donate.

Trend T11E Router + bits & Fox F50-842 extractor motor

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

The Gent

Established Member
Joined
28 Nov 2010
Messages
70
Reaction score
4
Location
Scarborough
I bought a full router table setup recently so I have my Trend T11E spare to requirements. It hasn't really had that much use. They are going for around £250 new, I am looking for £125.

20181104_145713.jpg

20181104_145731.jpg


I have also got a set of 15 router bits, never used, cheapest I have seen them is £42, I am looking for £20.

20181104_145722.jpg



Finally I have the motor of a F50-842 dust extractor. I got rid of the other bits thinking that I would make a custom set up with a cyclone and a new filter, I was never happy with the fine dust that got through the fabric sacks. In the end I ended up getting something new from Axminster and this has just been a trip hazard in my workshop. To buy complete thing from new would be just over £200, looking for £25 if someone wanted to have a play with a custom dust extractor set up. The diameter of the Y inlets are 4" and the output is 5", I would take a guess that the inlet that the Y joins onto is 5" aswell. Extractor is 2hp.

20181104_152539.jpg

20181104_152519.jpg

20181104_152550.jpg


The motor would be collection only from Meltham, near Huddersfield, the router stuff I would be happy to post at cost.

Happy shopping.

Regards,

Kevin
 

Attachments

  • 20181104_145713.jpg
    20181104_145713.jpg
    154.4 KB · Views: 1,305
  • 20181104_145722.jpg
    20181104_145722.jpg
    151.8 KB · Views: 1,305
  • 20181104_145731.jpg
    20181104_145731.jpg
    118.8 KB · Views: 1,305
  • 20181104_152539.jpg
    20181104_152539.jpg
    125.9 KB · Views: 1,305
  • 20181104_152519.jpg
    20181104_152519.jpg
    111.1 KB · Views: 1,304
  • 20181104_152550.jpg
    20181104_152550.jpg
    83.4 KB · Views: 1,305
I'll take the dust extractor if you're happy to hang on to it until I come down to Harrogate on the 14th of this month?
 
I have PMed both Hot stuff and Fireburst. I am not 100% sure if these PMs are coming through. Just let me know one way or another what you want to do.

Regards,

Kevin
 
Both messages replied to but if there's still a problem just let me know here and we'll sort something out.

Cheers

HS
 
Hi,

I can't seem to reply to the message you sent me. Please email how you would like to be paid and I am happy to have the cheaper transport (Hermes I think you said). Please PM me your email address and how you would like to be paid and I will email you the delivery address

thanks

Andy
 
I picked up the dust extractor motor from Kevin this afternoon. A proper gentleman with a lovely wife and a flat out busy life.
Many thanks Kevin, a pleasure meeting you.

Hugh.
 

Latest posts

Back
Top