To restore or not restore...that is the question

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

AdrianUK

Established Member
Joined
6 Jun 2018
Messages
272
Reaction score
104
Location
Hampshire
Have had this old tool chest for years, bought it at auction full of carpentry tools, and then put it away out of sight, out of mind at the back of the garage. Clearing out today, and rather than throw it out, started taking a better look at it, and thinking, maybe a little restoration project. Is it worth it though, welcome opinions. It’s pine, approx 90cm in length, 40cm depth and 40cm height.
 

Attachments

  • D55E160F-BC93-4469-B473-71B090007E7E.jpeg
    D55E160F-BC93-4469-B473-71B090007E7E.jpeg
    3 MB · Views: 84
  • 53F427C7-BC7F-468D-BD92-5F8BC9C0547D.jpeg
    53F427C7-BC7F-468D-BD92-5F8BC9C0547D.jpeg
    2.6 MB · Views: 84
  • 5D663AD6-438B-4276-9B1A-7153BA9DC544.jpeg
    5D663AD6-438B-4276-9B1A-7153BA9DC544.jpeg
    2.4 MB · Views: 80
  • FEA31B07-0105-4A3A-8060-97CDA0E08DE1.jpeg
    FEA31B07-0105-4A3A-8060-97CDA0E08DE1.jpeg
    2.8 MB · Views: 71
  • 624C6772-620A-45DC-A17B-F88DE1B84B20.jpeg
    624C6772-620A-45DC-A17B-F88DE1B84B20.jpeg
    2.9 MB · Views: 67
  • F4A19020-2ADF-4EE5-AB13-1C0B3B1508D8.jpeg
    F4A19020-2ADF-4EE5-AB13-1C0B3B1508D8.jpeg
    2.7 MB · Views: 62
In market value terms it's not worth much in that condition and probably won't be worth your time if you restore it.
But fortunately we're not all economic robots.

That looks a very manageable little project to make a useful tool chest for yourself.

Scrub off the dirt and dust, wire brush the rust off the handles and then stabilise the outside with some boiled linseed oil over the paint. Toolboxes don't belong in the sitting room and needn't look as if they do. Don't bother with new paint unless you also dye your hair and believe it makes you look young.

Fix the hinges. Make up a bit of trim to match what's still there.

Have fun making a dovetailed tray with a hinged lid to slide on the end bearers. Also a till at the bottom to hold saws.

There's plenty of info online to show you what's missing - or ask for specifics on here.
 
You might be surprised, at just what the antiques market would offer in that untouched state!
Just sold one in that state, along with other stuff, so can't say the individual price, but he was very keen for it to be included.
But as Andy say's it's a nice project, that will be useful at the end.

Bod.
 
Ok, so here are the results of an initial brush up and wipe down with meths and oil solution. Interestingly, it’s possible this started life as a travel trunk, remains of a London & Southwestern railway luggage sticker on the side. Originally looks like it was black, the burgundy paint is on top and the luggage label on top of that. Just real quick clean up has revealed details I’d not noticed, has some nice joinery joints, secure lock and the colour underneath all the dust and grime sort of appeals now.
 

Attachments

  • 9BBE6A9D-04C3-49BE-BD02-5FA707858D80.jpeg
    9BBE6A9D-04C3-49BE-BD02-5FA707858D80.jpeg
    2.7 MB · Views: 75
  • 016C8002-6882-47BB-A4B4-9ABB30AE9D40.jpeg
    016C8002-6882-47BB-A4B4-9ABB30AE9D40.jpeg
    2.4 MB · Views: 76
  • B5558C56-1CC2-404C-B626-9EC0DCF9E10D.jpeg
    B5558C56-1CC2-404C-B626-9EC0DCF9E10D.jpeg
    1.8 MB · Views: 85
  • 8505C767-84BC-4F2C-8716-BDD90347052D.jpeg
    8505C767-84BC-4F2C-8716-BDD90347052D.jpeg
    877.4 KB · Views: 82
Andy, Bod, thanks for your opinions, will definitely give it go. The top is absolutely awful, so will need stripping, but I agree with you Andy, it needs to stay sympathetic to its era. I have one of the missing mouldings so just a small top piece required, hopefully I’ll be able to age it to match, a stained wax ?
separately, I thought I’d posted an introduction some time back, but appears I didn’t post it correctly, so hello to all.
 
Depends what you like! I’d restore that in a fire, others might pay handsomely for it as a coffee table

Aidan
 
London and South Western Railway? That dates it to pre 1923, then - the LSWR was amalgamated with other companies in the south of England into the Southern Railway at that date.
 
London and South Western Railway? That dates it to pre 1923, then - the LSWR was amalgamated with other companies in the south of England into the Southern Railway at that date.
you see, It's details like that which add value to the piece. Personally, as has been said before, Quick clean up, then bung it on E-bay. I wish I could find all these people that have more money than sense
 
Definitely restore it but keep patina...get rid of those bodgie hinges and find some'used' of the era. You have good handles there too....The thing also is that to buy something similar could cost a motza...I don't know about UK but in Horstroylya it would bring over $100 as it is and I wouldn't worry about the currency conversion ...$1 in Australia is a quid in England in terms of say tradesman wages.

Some good advice came to you from a couple of commenters...but when you first start...if you do..on the shellac or whatever it is...use a lint free cloth packed with cotton wool, dipped in metho and wipe it in one direction...the longest see how it begins to look..no rip tear and bust. Best of 'British with it'
 
Have had this old tool chest for years, bought it at auction full of carpentry tools, and then put it away out of sight, out of mind at the back of the garage. Clearing out today, and rather than throw it out, started taking a better look at it, and thinking, maybe a little restoration project. Is it worth it though, welcome opinions. It’s pine, approx 90cm in length, 40cm depth and 40cm height.

It's a "keeper"
 
this isn't a travel trunk, it's a joiners tool chest, I would probably leave it as is, they make useful storage chests, it is missing the original trays and has some damage to the skirt, which looks like it was nailed in place from the photos,
 
Updating on what happened to this old wooden trunk.
Decided to follow what many of you had suggested and do very littlexcept stabilising, cleaning and protecting its appearance.
So, this is what it’s ended up like.

1CBF8122-665D-4AA1-920C-EA289B32CCDF.jpeg
9E7FB862-9C64-4E3A-8993-3D1A0C1D3482.jpeg
53F87137-6289-4436-84F5-081162374783.jpeg
546FA1D0-3994-4200-9135-152CD3877BA7.jpeg
27167277-5196-4A52-AAAB-EC48E652F327.jpeg
A2196E39-6EEE-4236-9EFD-BDEE94AF2C1A.jpeg
1CBF8122-665D-4AA1-920C-EA289B32CCDF.jpeg
27167277-5196-4A52-AAAB-EC48E652F327.jpeg
A2196E39-6EEE-4236-9EFD-BDEE94AF2C1A.jpeg


Unfortunately could not save the painted top surface, it was very unstable under all the greasy dirt, but I like the contrast now.
The old LSWR label is still in place and just about readable.

Has had a couple of coats of Briwax antique brown to help protect the finish.

Now it’s finished, I may be reluctant to let I go, however, I see this sort of stuff can be very commercial also.

Anyway, hope its of interest to some.
 
Last edited:
Back
Top