Tips to make your work go more smoothly

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Alf":1kfktp0r said:
[ that velcro doesn't leave too bad a finish...
biggrin.gif

Ah I see you have the upmarket sander, I have clips to hold plain ordinary sheets on mine, the rubber backing does not do a good job on the timber.
 
Remember that you started measuring at 10cm on your tape rather than using the little metal hook!!! :oops:
 
Useful tools to have in the workshop
1) a loupe (the type of magnifying glass that you hold in your eye like a monocle, much used by jewellers, purchased from opticians for about £12), and
2) tweezers from the local chemist £1.50?
This is unless you prefer to remove splinters by touch, or have very good eyesight (birch ply splinters can go quite deep)
John
 
it ummmmm..... never hurts to check that the assembly you're gluing up actually fits through the shop door..... dooohhhhhhhh (homer)
 
Midnight":3lxatczr said:
actually fits through the shop door

One problem I don't think I will have in this shop. :D If I open the big doors fully I have an opening 8' high and 12' wide. :shock:
 

Latest posts

Back
Top