• We invite you to join UKWorkshop.
    Members can turn off viewing Ads!

Tenons on the Legacy

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

JFC

Established Member
Joined
30 Sep 2005
Messages
2,180
Reaction score
0
Location
London
I normally do my tenons on the bandsaw but reading G Woodworking i thought id try the router table just for a change , i found it took a very long time to do 1 tenon but the results where great . I found it quite hard holding the timber and the router wanted to snatch the timber from me , so tomorrow im going to test the legacy with a flat bed slotted into the guide rails , If it works at least i can say the Legacy has earned me some money :lol:
 

JFC

Established Member
Joined
30 Sep 2005
Messages
2,180
Reaction score
0
Location
London
Well it worked very well on smaller stock , it took 6 passes on the Legacy at full depth to cut 1 tenon cheek on 100 x 50 Oak , better than 8 at 1/2 depth and 8 at full depth on the router table .
I had one small problem ...... You know when you forget to clamp your work down then hit it with a cutter at a few rpm :whistle:
 

frank

Established Member
Joined
10 Sep 2003
Messages
938
Reaction score
0
Location
cheshire
yes wheeeeeeeeeeeeeee thump time to change your pants :shock:

frank
 
Top