Seb Palmer
Established Member
Hi folks, I'm wondering what the terms are for saw blades, regarding whether or not the teeth of the blade are 'offset', e.g. when they lean alternately left or right, resulting in a cut (kerf?) wider than the thickness of the saw blade, or flush with the blade, i.e. giving a flat blade-width cut.
I'm restoring some saws, and need to fabricate new handles. But if I use the saw blades of each individual saw, they cut a kerf wider than the saw blade. Thanks in advance for any helpful responses.
I'm restoring some saws, and need to fabricate new handles. But if I use the saw blades of each individual saw, they cut a kerf wider than the saw blade. Thanks in advance for any helpful responses.