Jes*b
Member
hi, my first post. Glad to have joined. I recently picked up a Startrite TA 1250 in very good shape. I am pleased . Have assembled and am happy thus far. My only question mark is about the adjustable angle fence that attaches to the sliding bed perpendicular to the blade. First of all its missing the stop stock latch/adjuster assembly (i would just call that a sliding stop) and also the stop that fits in the end of the extending rule. The fence itself is in good nick but it seems these pieces are missing. and i would def be needed them
Unless i'm missing something very obvious there does not seem to be a way of locking the adjustable angle part of the fence when its in its zero (90' to the blade position)
finally ....also missing is the sliding mitre gauge
i have the manual downloaded from a link on here, thanks. anyone help with advice / parts before i call A.L.T , althpough im not sure whether their spares stock would run to any of the above.
cheers
jes
Unless i'm missing something very obvious there does not seem to be a way of locking the adjustable angle part of the fence when its in its zero (90' to the blade position)
finally ....also missing is the sliding mitre gauge
i have the manual downloaded from a link on here, thanks. anyone help with advice / parts before i call A.L.T , althpough im not sure whether their spares stock would run to any of the above.
cheers
jes