Start stop button

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dick

New member
Joined
24 Feb 2019
Messages
1
Reaction score
0
Location
Gloucestershire
Hi
I have a Kitty 619tti mortise saw but the stop/ start button burnt out just wondering where I could get a replacement from as I have looked everywhere to find one
 
If its the standard green and red button switch they are everywhere. Just search for an NVR switch (No Voltage Release), lots on ebay, shop around because prices vary wildly.
 
Almost, but no cigar. =D>
A relay cant operate without voltage.
Just in case you dont know how it works...
While there is electricity the switch keeps the internal relay energised, allowing the machine to work. In the event of a power failure, the relay inside the switch drops out, disconnecting the machine from the mains, and has to be manually reset after power is restored.
This is to stop the machine starting up by itself when power comes back on.
 
Back
Top