Stair rail joint advice

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

Steve Blackdog

Established Member
Joined
24 Mar 2008
Messages
463
Reaction score
10
Location
Cumbria
Hi folks,

I am scratching my head about whether I can cut the joint on hand rail to a rotated newel post using machines, or whether it will need to be hand cut.
see photos. The newels are on an angle, so the joint will need a to sit at around 42 degrees from the vertical, but also have a V slot cut to take account of the ‘corner’ of the post.

Those Victorians were too clever for their own good!

any ideas?

cheers

Steve
B86E9563-C33C-4F78-9154-1A6267FB6050.jpeg
E8F2B19D-6654-46D1-A047-CD33F7FDB2B3.jpeg
FE417B7D-0C7D-4CD1-B320-AD842D3C27D3.jpeg
782F7109-4D24-4116-A806-C5B49F311006.jpeg
 

Latest posts

Top