Spare parts for a Fox Planer Thicknesser Model F22564-250

[kamekaze5555]

The bearing has gone in my planer at the end of the roller holding the blades and I can't find a replacement roller or indeed a company selling Fox spare parts. Can anybody help on here. Thanks in advance. The machine is too good to throw away and I am half way through a project so could really do with any advice at all on how to rectify my problem

 

[RogerP]

Have you taken the bearing out yet? I expect it's a fairly standard one and once you have the dimensions somewhere like Simple Bearings should be able to help you. http://simplybearings.co.uk/shop/?gclid=CJ7-_5i0s8gCFYkBwwodm1kDjw

 

[kamekaze5555]

Small bearing has totally disintegrated there is nothing left at all but I will measure the shaft 2moro and the inside casing and see what can be done

 

[RogerP]

There is an exploded diagram and parts list here...
http://www.bricoutensili.com/en/fox...arts-for-planer-e-thicknesser-f22-564250.html
and a rather poor downloadable PDF of the exploded diagram available right at the bottom of the page.

 

[blackrodd]

Couldn't find anything, After a while I realised you had Quoted the model number, etc incorrectly.
I believe you'll find It's a FOX 22-564/250, here's a link to Poolwood whom have some stocks of day to day
parts, so may help with you're bearing needs or a drawing and parts list.
HTH Regards Rodders

http://www.poolewood.co.uk/acatalog/cop ... n____.html

 

[blackrodd]

Couldn't find anything, After a while I realised you had Quoted the model number, etc incorrectly.
I believe you'll find It's a FOX 22-564/250, here's a link to Poolwood whom have some stocks of day to day
parts, so may help with you're bearing needs or a drawing and parts list.
HTH Regards Rodders

http://www.poolewood.co.uk/acatalog/cop ... n____.html

I see Roger P has has had a better find, a parts list and drawing etc
Rodders

 

[kamekaze5555]

I have the outside casing in my hands right now and trust me it is a Fox Planer Thicknesser Model no F22564-250 and not a Fox 22454-250

 

[blackrodd]

I have the outside casing in my hands right now and trust me it is a Fox Planer Thicknesser Model no F22564-250 and not a Fox 22454-250

You are right of course, F22-564-250 it is I just looked at the link, Can't read my own writing now!
Regards Rodders