• We invite you to join UKWorkshop.
    Members can turn off viewing Ads!

Sjobergs workbench

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

Sauric

New member
Joined
23 Jul 2019
Messages
4
Reaction score
0
Location
Aylesbury
Hi Everyone

I recently bought a used Sjobergs workbench. There is a hole in the top which I assume is for a holdfast. However the dimensions don't appear to be compatible with any current model of holdfast. The hole is 1.50" diameter (nominally 38mm) and has a metal liner/bush which takes the ID down to 1.25" (33mm). The bush is about 2" deep. My question is: does anyone know of a holdfast which would be compatible with these dimensions? Alternatively, any thoughts on what else this metal bushed hole might have been used for?

Any thoughts would be welcome.

Thanks

P.S. I tried emailing Sjobergs but have had no response
 
Top