Settlers of Catan - or cutting hexagons...

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Those look great , that board of Lace wood looked very nice , would have made a lovely box(y)no expert with Lasers but i know you will struggle to cut anything other than very thin softwoods with your machine but they are ideal for etching,could yours cut 6mm hardwood:unsure: the simple answer is no , you would need to go with Co2 and a pretty powerful one or Fibre which i know even less about but is supposed to be good but expensive.
 
The laser will in theory cut the wood but over a number of passes and a burned cut not clean...

this photo shows today’s work- the port triangles which go around the board - same principle in printing a triangle and then rough cutting with the bandsaw and finishing on the sander, but far more accurate results as I have improved - photo to come of board laid out...
21D172CC-2C50-4F9A-87AD-6911E7AB99EA.jpeg966F1CC8-D3BB-45CE-9B69-6F9A348AE6E1.jpeg8F1EDF67-577A-43E8-A18D-C8282E39B816.jpeg41C4E830-37A5-4D92-B120-ACD687CB3F30.jpeg
 
All I need to do now is get in to board games and I can get myself a laser too :ROFLMAO:

Maybe my motivations aren't quite right.
 
Back
Top