second go at a egg

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

nev

Established Member
Joined
21 Jan 2011
Messages
4,860
Reaction score
16
Location
The green and wetter end of the M4.
Had a free afternoon, after finishing me candlesticks, so thought I'd have a go at turning an egg.
and then stuck a clock face in it.
A bit too pointy, but it killed half an hour :) ....
504bfc34c6cff8feafff9742dc12b014.gif
 
nev":odwt94qm said:
Had a free afternoon, after finishing me candlesticks, so thought I'd have a go at turning an egg.
and then stuck a clock face in it.
A bit too pointy, but it killed half an hour :) ....
504bfc34c6cff8feafff9742dc12b014.gif

I take it thats an egg timer.
 
The Eriba Turner":2g9q1vu4 said:
Hi Nev
That looks nice. How did you cut the recess for the clock? Did you cut the recess before or after turning?
Regards Keith

both :? I initially drilled the 35mm hole while it was square stock, then turned and then realised that the face of the clock mech wouldnt sit flush, so when I'd finished put it back under the drill and delicately did a 45?mm hole on top. Didnt quite line up though :(
we live and learn :)
 
Back
Top