• If you have bought, sold or gained information from our Classifieds, please donate to UK Workshop and give back.

    You can become a Supporting Member or just click here to donate.

Wanted Router table

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

Peanutcoxy

Member
Joined
22 Mar 2020
Messages
17
Reaction score
3
Location
Gloucester
Hi everyone, I’m after a router table to fit my DeWalt DW625E. Alternatively, happy to buy a used one with a router attached. Will only be using it for profile routing around templates and for bevels.
 

Spectric

Established Member
Joined
19 Feb 2015
Messages
3,854
Reaction score
2,032
Location
North Cumbria
Lots of info on these threads, you may be better off either making your own or partially making your own as it seems the fence is not going to be to important.

People have used kitchen worktop to make table tops, a router cut out guide here AUKTools Router Insert Plate Template and a 3/4 bearing guided cutter. You don't state any budget, these things can get pricey depending what you go for.
 
Top