Round Carbide Bit size

UKworkshop.co.uk

Help Support UKworkshop.co.uk:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

pops92

Established Member
Joined
10 Oct 2016
Messages
291
Reaction score
74
Location
Boston Lincolnshire
As anyone purchased these particular bits shown in the photo. Most are 4.5 thickness and 5mm hole. These are 2.5mm thickness which I am looking for. However seller cannot give me size of hole as they are in good old China.
As anyone purchased these off Ebay and know the hole size. :?:
 

Attachments

  • 20191011_104404.jpg
    20191011_104404.jpg
    154.4 KB · Views: 627
Hi,

The 12mmx2.5mm one I just bought accept an M4 x 8 CSK machine screw. Will need a few more screws as the other cutters came with no screw as they were from a different supplier. Will let you know what the nut and bolt specialist say :)

Cheers,

Jon.
 
Thanks for that I am now sorted with some 12mm x 2.5mm with a 4.29mm hole in them. Same as the ones I have been using.
 

Latest posts

Back
Top